Comments on: My audio receiver stopped sending signal to my subwoofer. What is causing this problem? http://www.acoupower.com/velodyne/my-audio-receiver-stopped-sending-signal-to-my-subwoofer-what-is-causing-this-problem Subwoofer drivers Tue, 22 May 2012 17:55:33 +0000 http://wordpress.org/?v=2.7 hourly 1 By: piano guy http://www.acoupower.com/velodyne/my-audio-receiver-stopped-sending-signal-to-my-subwoofer-what-is-causing-this-problem/comment-page-1#comment-7833 piano guy Wed, 11 Nov 2009 06:14:59 +0000 http://www.acoupower.com/velodyne/my-audio-receiver-stopped-sending-signal-to-my-subwoofer-what-is-causing-this-problem#comment-7833 You need to reenter the setup menu, and ascertain that the speakers are set to "small", and that the subwoofer is turned on. Also, make sure that you didn't turn the sub down accidentally (if it is too soft a volume setting, it will sound as if it is off), or reset the crossover frequency (too low, and it won't get much of the signal to process). Good luck - it is probably the setup.<br><b>References : </b><br> You need to reenter the setup menu, and ascertain that the speakers are set to "small", and that the subwoofer is turned on. Also, make sure that you didn’t turn the sub down accidentally (if it is too soft a volume setting, it will sound as if it is off), or reset the crossover frequency (too low, and it won’t get much of the signal to process).

Good luck - it is probably the setup.
References :

]]>