best settings for my amp?

i have a denon1507 amp with a velodyne impac12, bw 683 tower for the front, bw htm62 for center, 2 bose cube speakers for the back

Whats the best settings
Speakers large or small?
Cross over for the amp above 80 or below
Phase for the sub
Frequency for the sub
Dts or prologic
Help please
The room is medium size

Speakers on small because you have a sub
crossover at 80 (probably) depends on your room acoustics you have to tweek it
Same with phase try it one way then the other and see which sounds more natural.
DTS or Dolby Digital

This entry was posted on Saturday, November 7th, 2009 at 10:28 pm and is filed under velodyne. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

3 Responses to “best settings for my amp?”

Lance on November 8th, 2009 at 4:10 am

Speakers on small because you have a sub
crossover at 80 (probably) depends on your room acoustics you have to tweek it
Same with phase try it one way then the other and see which sounds more natural.
DTS or Dolby Digital
References :
AVDADDY on November 8th, 2009 at 4:18 am

Any time you’re using a sub, you need to set the speakers to "small".
Set the crossovers to the upper bass limit of your main speakers.
Sub phase: experiment.
Sub Frequency: upper bass limit of your main speakers
DTS or ProLogic; depends upon your program material. It will vary.

I’ll bet it sounds kick ass.
References :
Jasper on November 8th, 2009 at 5:08 am

-all speakers small.
-cross over at 100
-phase is something you need to test and listen to with your speakers to see what works for you.
-DTS or prologic depends on the source material.
References :

Acoupower