How do I conect the loudspeakers of a 1996 Ranger Truck Radio into a new radio?
The radio of my Ranger 1996 is broken and I´ve bought a new one but I can´t get sound, I´ve tried to identify which wires connect to the loudspeakers but I got no signal. Thanks for the answers.
I actually replaced all my speakers in my 1997 ranger (exact same truck new year), I made my own connectors for the existing radio but after replacing the radio a couple years later I ran into your problem. You must check the OHM rating on the new radio, it can’t exceed that of your speakers. Also make sure that the fuses in the fuse box (to the right of the steering wheel) have not blown and then make sure you have the correct connectors for antenna as well as the speakers (they are not all the same).
Hope this helps.
I actually replaced all my speakers in my 1997 ranger (exact same truck new year), I made my own connectors for the existing radio but after replacing the radio a couple years later I ran into your problem. You must check the OHM rating on the new radio, it can’t exceed that of your speakers. Also make sure that the fuses in the fuse box (to the right of the steering wheel) have not blown and then make sure you have the correct connectors for antenna as well as the speakers (they are not all the same).
Hope this helps.
References :
Personal experience.