Acoupower
What type of Car amplifier would be right for me?
I currently have two 5.25 inch Boss LA53’s in the front (150 watts RMS, 300 peak) and two 6X9 inch Boss D69.5’s in the back (400 watts RMS, 800 peak). Obviously this is too much power for a radio to handle and i am very inexperienced in the knowledge of car amplifiers. I would simply like to know what kind of an amp would be appropriate for this system (what kind of wattage i would need more importantly, and perhaps good brands as well.)
well going by the differance on rms watt, cause that’s what really matters.
i would say 2 thing. get a amp for the front speakers and a amp for the rear 6×9’s. or. you can go with boss that is the same brand of your speakers. if you go with 1 amp. you’ll need a 4ch. amp
check this one out.
CX1000 four chanel amp. 200watts x 4 @ 4ohms. rms. just don”t turn up the gain to much cause you might blow you front speakers.
4 Responses to “What type of Car amplifier would be right for me?”
Leave a Reply
July 1st, 2009
Posted by admin in car amplifier |
you would want a 2 or 4 channel amp appx 400 watts output. Kenwood makes good amps. The only thing if you have a 4 channel amp 400 watts that is only 100 watts per channel unless you bridge it down
References :
get a amp that matches your rms of your speaker if the speaker say 400 rms then get a amp that say 400 rms make sure that you check the ohms of the speakers
References :
Well what u want to do is get an amp that matches up with ur RMS..
i think the best thing u could do is get a 4-channel amp because from there u could control ur front and rear speakers instead of just one control with a 2 channel amp..
a good brand dat is good and known for their quality is alpine..
and if u really want it to sound good u should also buy a equalizer..u could control everything on it from bass to treble.and it also inhance’s the sound quality..
References :
well going by the differance on rms watt, cause that’s what really matters.
i would say 2 thing. get a amp for the front speakers and a amp for the rear 6×9’s. or. you can go with boss that is the same brand of your speakers. if you go with 1 amp. you’ll need a 4ch. amp
check this one out.
CX1000 four chanel amp. 200watts x 4 @ 4ohms. rms. just don”t turn up the gain to much cause you might blow you front speakers.
References :